3.4/4.0 GHz Tunable Resonant Cavity in SIW Technology Using Metal Post and PIN Diode on a Low-Cost Biasing Network for 5G Applications

R. C. Caleffo, F. S. Correra

Abstract


This paper presents a dual-band resonant cavity in Substrate Integrated Waveguide (SIW) technology to operate in the range from 3.3 GHz to 4.2 GHz, spectrum considered for the Fifth Generation (5G) network. The cavity was designed to operate at 3.4 GHz and 4.0 GHz. To achieve different states, a jumper and a PIN diode switch are considered as switching elements, connecting and disconnecting the bottom and the upper walls of the SIW resonant cavity through a metal post inserted inside its internal volume. A fitting equation is proposed to predict the maximum resonance frequency caused by the insertion of a single metal post inside the internal volume of the SIW resonant cavity and a new low-cost biasing network is designed on a thin dielectric substrate allocated on the upper wall of the SIW resonant cavity, using transmissions lines and a single capacitor, reducing the final cost and the insertion losses. Good agreement was observed among the fitting equation, computational electromagnetic simulations, and experimental results, validating the proposed methods.

Keywords


Biasing Network, SIW technology, Tunable circuits, 5G frequencies

Full Text:

PDF

References


A. Wortmann, A, B. Combemale, O. Barais, “A systematic mapping study on modelling for industry 4.0,” in Int. Conf. on Model Driven Eng. Languages and Syst., Austin, USA, Sept. 2017, pp. 281–291.

F. Bonavolontà, A. Tedesco, R. S. L. Moriello, et al, “Enabling wireless technologies for industry 4.0: State of the Art,” in Int. Workshop on Measurement and Networking, Naples, Italy, Sept. 2017, pp. 1–5.

M. Wollschlaeger, T Sauter, J. Jasperneite, “The Future of Industrial Communication: Automation Networks in the Era of the Internet of Things and Industry 4.0,” IEEE Ind. Electron. Mag., vol. 11, no. 1, pp. 17-27, Mar. 2017.

C. Leyh, S. Martin, T. Schäffer, “Industry 4.0 and Lean Production – A Matching Relationship? An analysis of selected Industry 4.0 models,” in Federated Conf. on Comput. Sci. and Inform. Syst., Prague, Czech Republic, Sept. 2017, pp. 989–993.

W. Ejaz, M. Ibnkahla, “Multiband Spectrum Sensing and Resource Allocation for IoT in Cognitive 5G Networks,” IEEE Internet Things J., vol. 5, no. 1, pp.150-163, Feb. 2018.

D. Schinianakis, “Alternative Security Options in the 5G and IoT Era,” IEEE Circuits Syst. Mag., vol. 17, no. 4, pp. 6-28. Fourthquarter 2018.

E. Ezhilarasan, M. Dinakaran, “A review on Mobile Technologies: 3G, 4G and 5G,” in Int. Conf. on Recent Trends and Challenges in Computational Models, Tindivanam, India, Feb. 2017, pp. 369–373.

T. Sharma, K. Ritesh, N. Chauhan, et al, “Analogous study of 4G and 5G,” in Int. Conf. on Computing for Sustainable Global Develop., New Delhi, India, Mar. 2016, pp. 2137–2140.

I. Belikaidis, A. Georgakopoulos, E. Kosmatos, et al, “Management of 3.5-GHz Spectrum in 5G Dense Networks: A Hierarchical Radio Resource Management Scheme,” IEEE Veh. Technol. Mag., vol. 13, no. 2, pp. 57–64, Jun. 2018.

J. Lee, E. Tejedor, K. Ranta-aho, et al, “Spectrum for 5G: Global Status, Challenges, and Enabling Technologies,” IEEE Commun. Mag., vol. 5, pp. 12–18, Mar. 2018.

Y. Cassivi, L. Perregrini, P. Arcioni, P, et al, “Dispersion characteristics of substrate integrated rectangular waveguide,” IEEE Microw. Compon. Lett., vol. 12, no. 9, pp. 333–335, Sept. 2002.

M. Bozzi, A. Georgiadis, K. Wu, “Review of substrate-integrated waveguide circuits and antennas”. IET Microw., Antennas Propag., vol. 5, no. 8, pp. 909–920, Jun. 2011

X. Chen, K. Wu, “Substrate Integrated Waveguide Filter: Basic Design Rules and Fundamental Structure Features,” IEEE Microw. Mag., vol. 15, no. 5, pp. 108–116, July-Aug. 2014.

X. Chen, K. Wu, “Substrate Integrated Waveguide Filters: Design Techniques and Structure Innovations,” IEEE Microw. Mag., vol. 15, no. 6, pp. 121–133, Sept.-Oct. 2014.

X. Chen, K. Wu, “Substrate Integrated Waveguide Filters: Practical Aspects and Design Considerations,” IEEE Microw. Mag., vol. 15, no. 7, pp. 75–83, Nov.-Dec. 2014.

R. C. Caleffo, “New Design Procedure to Determine the Taper Transition for Impedance Matching Between Microstrip Line and SIW Component,” J. of Microw., Optoelectronics and Electromagn. Appl., vol. 15, no. 3, pp. 247–260, July-Sep. 2016.

J. C. Bohorquez, B. Potelon, C. Person, et al, “Reconfigurable Planar SIW Cavity Resonator and Filter,” in Int. Microw. Symp. Dig., San Francisco, USA, Jun. 2006, pp. 947–950.

M. Armendariz, V. Sekar, K. Entesari, “Tunable SIW Bandpass filters with PIN diodes,” in Eur. Microw. Conf., Paris, France, Sept. 2010, pp. 830–833.

R. C. Caleffo, F. S. Correra, “Liquids electrical characterization sensor using a hybrid SIW resonant cavity,” Microw. and Opt. Technol. Lett., vol. 60, no. 2, pp. 445–449, Jan. 2018.

D. M. Pozar, Microwave Engineering, 4th ed. New York, NY, USA: John Wiley & Sons, Inc., 2011.

S. Ramo, J. R. Whinnery, T. V. Duzer, Fields and waves in communication electronics, 3rd ed. New York, NY, USA: John Wiley & Sons, Inc., 1993.

R. G. Carter, “Accuracy of microwave cavity perturbation measurements,” IEEE Trans. Microw. Theory Techn., vol. 49, no. 5, pp. 918–923. May 2001.




DOI: http://dx.doi.org/10.1590/2179-10742020v19i11881

Refbacks

  • There are currently no refbacks.


© Copyright 2007-2016 JMOe Brazilian Microwave and Optoelectronics Society (SBMO) and Brazilian Society of Electromagnetism (SBMag)