Design of Bootlace Lens for Multiple Beam Forming at UHF Band

P. K. Singhal, Ravi Pratap Singh Kushwah, P. C. Sharma, D. C. Dhubkariairst

Abstract


Bootlace lens is the most appropriate choice for multiple beam forming. Proposed here is a modified geometry and design approach for bootlace lens. A bootlace lens at UHF frequency band has been designed and fabricated. The results for the designed lens are in agreement with the design value.

Full Text:

PDF

References


Butler J. and Lowe R., "Beam forming matrix simplifies design of electronically scanned antennas``, Electronics Design, 9, pp170-173, 1961.

W. Rotman and R.F. Turner, "Wide angle microwave lens for line source applications``,IEEE Transactions on Antenna and Propagation, Vol. AP-11, pp 623-632, Nov 1963.

D. Archer, "Lens Fed multiple-beam arrays``, Microwave J. Vol.18, pp 171-195, Sept. 1984.

J.P.Shelton, "Focusing characteristics of symmetrically configured bootlace lenses``,IEEE Transactions on Antenna and Propagation, Vol. AP-26, pp 513-518, July 1978.

M.L. Kales and R.M. Brown, "Design consideration for two–dimensional symmetric bootlace lenses``, IEEE Transactions on Antenna and Propagation, pp 521-528, July 1965.

P. C. Sharma, R. D. Gupta, and P. K. Singhal, "Design & Analysis Bootlace Lens for multiple beam forming``, IETE Technical Review, Vol.16, No.1 pp 67-73, Jan-Feb 1999.

P.K.Singhal, P.C.Sharma and R.D.Gupta, "Rotman Lens with Equal Height of Array and Feed Contours,`` IEEE Transaction on Antennas and Propagation, Vol.51, No.8, pp 2048- 2056, August 2003.


Refbacks

  • There are currently no refbacks.


© Copyright 2007-2016 JMOe Brazilian Microwave and Optoelectronics Society (SBMO) and Brazilian Society of Electromagnetism (SBMag)